WeTek Community Forum

Nand Installation Failed

luis1987luis1987 Posts: 18WeTek Community Member
Hi all!
I'm trying to install Librelec through a NAND installation but it does not work. I download the zip file, exctracted the content in the microsd card (FAT32) and used the toothpick method. Everytime I receive an error with OTA failed.

What am I doing wrong?

Thank you


  • ThrallThrall Posts: 3,321WeTek Support Team
    luis1987 said:

    Hi all!
    What am I doing wrong?

    To start, you are installing in on NAND.
    This will void the warranty. So what i recommend is to put Android OS again on NAND

    Download this tool, to format your SDcard

    Second you need to download these files 4 files

    If you download as ZIP file extract it until you get 4 files listed like this
    - DB-J226-wetekplay2-master-ota-2016-12-22_12-53-18
    - dtb
    - factory_update_param
    - recovery

    After you have copied the files to your SDcard follow these steps
    - Insert the SDcard with the files in your device.
    - Disconnect your power supply.
    - Underneath your Device, you have an update button. (Small Hole)
    - With the update nail provided in your purchase, press that update button
    - While pressing, connect your power supply now
    - Keep pressing the button for 10 more seconds.

    After the 10 seconds the installation will start automatically.

    You can watch this video to help you apply the steps o mentioned above.

    Not to run LE, use an SDcard.

    Choose an image you desire for LE, you can take a look into the LE section

    Choose an SDcard image.

    use https://win32-disk-imager.br.uptodown.com/windows to write the image on your SDcard

    best regards

  • DieselDiesel Posts: 39WeTek Community Member
    @Thrall , Thank you for this tutorial and the files. I have installed succesfully!
  • luis1987luis1987 Posts: 18WeTek Community Member
    thank you! ;)
  • ThrallThrall Posts: 3,321WeTek Support Team
    You are welcome.
    Best regards

  • kesonjakesonja Posts: 118WeTek Community Member
    edited January 2017
    Cant delete this post,wrong section.
  • dariusdarius Posts: 58WeTek Community Member
    I did exacty as discribe above ,but it fails to install, it says fail to munt th sd card , it does not recognize the SD card.

    what should I do?
  • dariusdarius Posts: 58WeTek Community Member
    when I check the file manager app allthing are ther in sdcard.
    but when I push the nail for 10 scoends and power on wetek Iit come to the page I befogar the pictuer
    I use the option ply update from EXT it fails and show error no such device.
    so which option do I have to chose
  • dariusdarius Posts: 58WeTek Community Member
    boot systm now
    ply update from EXT
    ply update from cach
    ply update fron ADB
    pe data/factory reset
    pe cachecpartition
    boot to booloader
    wer down
    ew recovery logs

    which option of above shuold be select to install the openELEC on SD card?
  • wrxtasywrxtasy Posts: 1,221WeTek Community Member
    edited February 2017
    This official LibreELEC Wiki will help here:

    WeTek - Installing to NAND/eMMC

    Remember to unzip the LibreELEC .zip file and put the extracted contents on to a FAT32 formatted SD card.
Sign In or Register to comment.
© Copyright 2014 - Creative Dreams | Powered by Vanilla
All times are UTC