Play 2 any chans to downgreade from Android 6 to 5

jaros85
jaros85
Hello everyone.
I update my Wetek Play 2 to Android 6.0.1 and WEOS 3 but in this software there are several bugs:
1. Not working analog audio output
2. Not working front wifi and ethernet led
3. Default start in 1080p but in my case I dont have Full HD monitor

I know that downgrade will brick WP2 but is there any chance to downgrade to Android 5 and WEBOS 2.0.2 ?

I found information in this post wetekforums.com/v/index.php?p=/discussion/30525/unbrick-my-wetek-play-2-after-downgrade-weos3-to-weos2-solved but link was deleted

Comments

  • Thrall
    Thrall
    hi, yes. Contact the support at http://support.wetek.com

    You can submit a ticket and my colleagues will provide you all the instructions you need.

    Best Regards

  • juliocunha
    juliocunha
    Junior Member Posts: 2
    Hello Thrall once the same happened to me. The only way I got it was this: go to recovery and install this room (AndroidTV_Whizz_WhizzLite_Lolipop_7.0.1). Do not forget to do the normal procedures. Then go to wipe dat / factory reset and wipe cache partition then reboot system now and it will install android whizz. Go to settings, security and active unknow sources go to about wetek, buid number loads 8 times in okay and you will stay developer. Go to developer options and active usb debugging and allow mock locations. Enter again in recovery mode and you are ready to install (weos 2.0.2) do not forget to follow the same steps you did to install the other firmware.
  • JIMBOOOOOOOOOOOO
    JIMBOOOOOOOOOOOO
    What is android tv whizz whizzlite 701 rom?Where can i find this
  • WinWiz
    WinWiz
    Downgrading is simple.

    Flash weos 2.0.2 from recovery.
    On first boot your wp2 will hang, so reboot to recovery using the "upgrade needle" and flash this:
    https://mega.nz/#!gkRXWCrY!nKSaw3bGT6Qo4okPN-AAJyMmQ9kwSldFHbgnd6VBCCg

    That it -so enjoy weos 2.0.2
  • WinWiz
    WinWiz
    WinWiz said:

    Downgrading is simple.

    Flash weos 2.0.2 from recovery.
    On first boot your wp2 will hang, so reboot to recovery using the "upgrade needle" and flash this:
    https://mega.nz/#!gkRXWCrY!nKSaw3bGT6Qo4okPN-AAJyMmQ9kwSldFHbgnd6VBCCg

    That it -so enjoy weos 2.0.2

    Forgot to mention that you have to copy the file to a fat32 sdcard, so the wp2 will auto flash it when you reboot with the "upgrade needle" in the small hole on the back of your wp2...

  • ikaw143
    ikaw143
    Hello

    I do step by step now my device is brick Dead
    even when I connect it to PC by male to male USB the PC is not DETECTING the play 2
  • Thrall
    Thrall
    You should have contacted the support before you ended up using burning tool.
    This voids warranty.

    Although, I've checked our team already replied you by email with a possible solution. So please try to see if works.

    Best Regards

Sign In or Register to comment.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Discussions

© Copyright 2014 - Creative Dreams | Powered by Vanilla
All times are UTC