WeTek Community Forum

channels.conf will be overwritten in background

idefixidefix Posts: 3WeTek Community Member
I uploaded a channels.conf (only around 60 SAT channels) and VDR regocnize it, also after restarting the box, fine so far.

Unfortunatelly some event triggers a channel scan (I assume WirbelScan)
in the background and more than 1000 channels are added
to the channels.conf.
I don't want all these 1000 channels furthermore the EPG can be faster if the channellist is small, or I'm wrong ?
How can I fix my channels.conf to only 60 channels?
The easiest way, to make channels.conf read only doesn't help.
Or how can I disable the channel scan in the background?
Thanks a lot and regards


  • patrick31698patrick31698 Posts: 40WeTek Community Member
    You have to disable channel scan in the vdr settings.
  • idefixidefix Posts: 3WeTek Community Member
    Thanks a lot for this detailed answer ;-)
    What do you think, what I try in the last days ?

    I searched the web and read a lot but it didn't work.
    Either I do an obviuos step wrong or it is very tricky, I don't know.
    Maybe someone can give a detailed step-by-step instruction.
    Thanks a lot.
  • patrick31698patrick31698 Posts: 40WeTek Community Member
    Sorry for the short answer ;-)

    Here is what i did:

    #stop vdr

    systemctl stop service.multimedia.vdr-addon

    #locate Channels.conf

    find / -name channels.conf

    #Output should be

    #copy channels.conf to the Wetek play (i use filezilla) to storage/XYZ/channels.conf

    # replace channels.conf with your uploaded version
    cp /storageXYZ/channels.conf /storage/.kodi/userdata/addon_data/service.multimedia.vdr-addon/config/channels.conf
    cp /storage/XYZ/channels.conf /storage/.kodi/addons/service.multimedia.vdr-addon/config/channels.conf

    #Clear Kodi Database

    #Restart vdr
    systemctl start service.multimedia.vdr-addon

    Hope this helps


  • herrmeierherrmeier Posts: 11WeTek Community Member
    You have to configure this in VDR configuration.

    - stop the VDR backend
    - change "UpdateChannels = 5" to "UpdateChannels = 3" by texteditor

    nano /storage/.kodi/userdata/addon_data/service.multimedia.vdr-addon/config/setup.conf
    UpdateChannels = 3

    - start the VDR backend
  • idefixidefix Posts: 3WeTek Community Member
    To change the VDR setup.conf was the needed hint.
    Thanks a lot.
  • NE0NE0 Posts: 808WeTek Community Member

    go to:

    System --> TV --> Client specific --> Client specific settings (press right once)

    Setup --> DVB --> Update channels: (press right until you see "PIDs only" and press OK on the remote)

    Reboot WeTek to make sure all changes get loaded.


    Attachment not found.
Sign In or Register to comment.
© Copyright 2014 - Creative Dreams | Powered by Vanilla
All times are UTC