WeTek Community Forum

[Channel Editor] DreamSet Editor for WeTek Play

2

Comments

  • MafarricosMafarricos Posts: 74WeTek Community Member
    When I try to use this, if I import Theater never works again.
    It gets stuck on Initializing channels, or simply freezes.
    I use the Hard update, as the recommended never works.

    What is the probable cause?
  • GuRuGuRu Posts: 588WeTek Community Member
    dreamset246
    works tolerably confuses vertical right circular. The entire device 2 knowledge instead of 4.
    After importing the list, it is necessary to correct hands.
    dvWQ6NcB0KFHxnbKmRULg.png

  • mach1mach1 Posts: 737WeTek Community Member
    Dreamset 2.4.7

    New version 24/10/2015


    Fix: Enigma DVB-T2 reading/writing settings
    Update: better parsing when Pasting #EXTINF lines pasted from clipboard to dreamset


    http://www.tvimages.com/upload/index.php?action=downloadfile&filename=dreamset247.zip&directory=WeTek-Tools&


    x64
    http://www.tvimages.com/upload/index.php?action=downloadfile&filename=dreamset247x64.zip&directory=WeTek-Tools&
  • rfsimoesrfsimoes Posts: 23WeTek Community Member
    Hi,

    Is it possible to load a E2 settings and save it in wetek format?
    When I try to do it it gives me a error "wetek.db" file is missing or cannot be copied to another location.

    I also can't change channel numbers. Sorting works on dreamset but after a save or upload the numbers are reseted again.
  • rfsimoesrfsimoes Posts: 23WeTek Community Member
    I think I found something.

    If I import a E2 settings, the frequency has less a 0 and the symbol rate has one more to directly upload to the wetek.
  • rfsimoesrfsimoes Posts: 23WeTek Community Member
    I there any progress on the Dreamset issues?
  • GuRuGuRu Posts: 588WeTek Community Member
  • PmpsysPmpsys Posts: 9WeTek Community Member
    rfsimoes wrote: »
    Hi,

    Is it possible to load a E2 settings and save it in wetek format?
    When I try to do it it gives me a error "wetek.db" file is missing or cannot be copied to another location.

    I also can't change channel numbers. Sorting works on dreamset but after a save or upload the numbers are reseted again.

    Hi,

    Did you solve this problem? I'm with exactly problem... :(

    B. Regards
  • migtellamigtella Posts: 3WeTek Community Member
    Hello,
    I've used the Dreamset sometimes. However, after an upgrade from TvHeadend, all channels were disorganized. Wanted to re-record a list of channels but to enter the Dreamset "Test Configuration" and using the User: root and Pass: wetek, always appears the error message with: "Connecting to box Fail, please check your ftp parameters"

    How I can fix this?

    NOTE 1: I am using Openelec with Kodi 15.2 in Wetek DVB-s2
    NOTE 2: Sorry for my bad English.

    Thanks for the healps!!!
  • GuRuGuRu Posts: 588WeTek Community Member
    edited February 2016
    jea said:

    It is not working for me when using DreamSet Editor Beta 7 and a DVB-C tuner.

    1. What not work ?
    2. Why use such an old version?

    all dreamset-editor

    dreamset-editor
  • zoobihoobizoobihoobi Posts: 59WeTek Community Member
    I am getting the error when try to transfer the file to edit.
    I tested the connection and got the OK message. I am using root as user id and dreambox as password for wetek Play recommended under Firmware. When I test, got Ok message but when I click on Transfer and Click on Read, got the follow error

    "Connecting to SetBox1 (Wetek)
    Reading services fail
    Wetek Theater is not initialized, run wetek theater
    Transfer Complete with Error

    My receiver is working and I am watching the channel, do I need to exit We Tek Theater and try this process OR doing something wrong
  • zoobihoobizoobihoobi Posts: 59WeTek Community Member
    Waiting for the help :smile:
  • MasterChief117MasterChief117 Posts: 3,707Administrator - WeTek Community Manager
    Hi

    If you want to send a list for WeTek Theater (Android)

    The user and password are:

    root
    wetek

    Not dreambox...

    Best regards

  • zoobihoobizoobihoobi Posts: 59WeTek Community Member
    I tried with root and wetek but same error. What else could be the reason. I can ping the ip in command prompt
  • MasterChief117MasterChief117 Posts: 3,707Administrator - WeTek Community Manager
    Hi

    Which option you have selected?



    After testing, do you save the configuration or just press ok?

    Best regards

  • zoobihoobizoobihoobi Posts: 59WeTek Community Member
    I am using the WeTek Recommended and saving the configuration as well. Testing results oK but unable to read
  • MasterChief117MasterChief117 Posts: 3,707Administrator - WeTek Community Manager
    Try with Hard Update

    Best regards

  • zoobihoobizoobihoobi Posts: 59WeTek Community Member
    Same result. Read error
  • zoobihoobizoobihoobi Posts: 59WeTek Community Member
    Why your password field is 8 dots,
    Wetek password should be 5 dots

    There might be some issue with port.

  • GuRuGuRu Posts: 588WeTek Community Member
    Wetek OS no telnet password!
    DreamSet Editor for WeTek Play
  • zoobihoobizoobihoobi Posts: 59WeTek Community Member
    Same error :(
    Showing test OK but when try to read, got the error
  • GuRuGuRu Posts: 588WeTek Community Member
    what mistake ? what is written?
  • MasterChief117MasterChief117 Posts: 3,707Administrator - WeTek Community Manager
    Just made a test and everything went normal

    Best regards

  • zoobihoobizoobihoobi Posts: 59WeTek Community Member
    There must be some issue with me. I tried with earlier beta versions as well and all had a same result. Still figuring out what might be the issue (Scratching my head :) )
  • zoobihoobizoobihoobi Posts: 59WeTek Community Member
    Is there any other way, I can edit the channels.
    If I get tvservices.db file and edit it in dreamset editor and then ftp again to respective folder using Dream Control center. Will it work?
  • AnimaAnima Posts: 1,988WeTek Support Team
    edited March 2016
    Hello @zoobihoobi

    I just tested and everything went fine also.
    Maybe uninstall and install again the dreamset might work.
    Did you retrieved the channel list from wetek theater? using a USB media? and renaming the file to wetek.db? and copying it to the dreamset folder?

    Best regards

  • zoobihoobizoobihoobi Posts: 59WeTek Community Member
    Anima said:

    Hello @zoobihoobi

    I just tested and everything went fine also.
    Maybe uninstall and install again the dreamset might work.
    Did you retrieved the channel list from wetek theater? using a USB media? and renaming the file to wetek.db? and copying it to the dreamset folder?

    Best regards

    I tried uninstalling and reinstalling and also tried old version as well but did not suceeded.

    I am asking if I retrieve the file using DCC from amlogic folder, and open in dreamset editor , edit and save again to same folder, will it work?
  • zoobihoobizoobihoobi Posts: 59WeTek Community Member
    One more thing , I did not uninstall/ install as there is no such option. I am downloading dreamset editor from website and extracting the file and running exe file, that might be the reason for error.
  • GuRuGuRu Posts: 588WeTek Community Member

    One more thing , I did not uninstall/ install as there is no such option. I am downloading dreamset editor from website and extracting the file and running exe file, that might be the reason for error.

    delete you dreamSet folder and unpack my 100% working x64 DreamSet.
    100% working x64 DreamSet
  • zoobihoobizoobihoobi Posts: 59WeTek Community Member
    Lol.......already did it.... Tried everything, different password, different options, delete, download again but nothing working unfortunately :(
Sign In or Register to comment.
© Copyright 2014 - Creative Dreams | Powered by Vanilla
All times are UTC